First be Best, Then be First

Oak Bleached

Product Description

Wood characteristics:

  • varied colours, any jar white
  • acceptable glance
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • Finish Board is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The 4 or 6 mm EKO wearable layer consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Width 130-150 mm
Length 900-1200 mm
Wear layer thickness
4 or 6 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Oak Latter Macchiatto Nature

Product Description

Wood characteristics:

  • varied colours, any jar
  • edge whiteness allowed up to 15% of the width of one element
  • acceptable glance
  • healthy knots and putty without restrictions
  • special white undercoat
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • XXL is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, usable approx. 3.5 mm, consists entirely of a solid element – natural wood. The bottom layer is birch plywood..
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • XXL is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 15 mm
Width 160-180 mm or 200-240 mm
Length 1400-2200 mm
Wear layer thickness
3.5 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Oak Venice

Product Description

Wood characteristics:

  • varied colours
  • any jar
  • edge whiteness allowed up to 15% of the width of one element
  • acceptable glance
  • healthy knots and putty without restrictions
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • XXL is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, usable approx. 3.5 mm, consists entirely of a solid element – natural wood. The bottom layer is birch plywood..
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • XXL is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 15 mm
Width 160-180 mm or 200-240 mm
Length 1400-2200 mm
Wear layer thickness
3.5 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Oak Nature

Product Description

Wood characteristics:

  • varied colours
  • any jar
  • edge whiteness allowed up to 15% of the width of one element
  • acceptable glance
  • healthy knots and putty without restrictions
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • XXL is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, usable approx. 3.5 mm, consists entirely of a solid element – natural wood. The bottom layer is birch plywood..
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • XXL is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 15 mm
Width 160-180 mm or 200-240 mm
Length 1400-2200 mm
Wear layer thickness
3.5 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Oak Exclusive

Product Description

Wood characteristics:

  • similar colours, any jar
  • acceptable minimum whiteness, healthy small knots
  • acceptable minimum gloss
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • XXL is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, usable approx. 3.5 mm, consists entirely of a solid element – natural wood. The bottom layer is birch plywood..
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • XXL is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 15 mm
Width 160-180 mm or 200-240 mm
Length 1400-2200 mm
Wear layer thickness
3.5 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Oak Thermo

Product Description

Wood characteristics:

  • varied light and dark colours
  • thermal treatment
  • suitable for underfloor heating
  • any jar, no white
  • healthy knots up to 10 mm

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • Finish Board is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The 4 mm EKO wearable layer consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Width 130-150 mm
Length 900-1200 mm
Wear layer thickness
4 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Ash Thermo

Product Description

Wood characteristics:

  • varied light and dark colours
  • thermal treatment
  • suitable for underfloor heating
  • any jar, no white
  • healthy knots up to 10 mm

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • Finish Board is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The 4 mm EKO wearable layer consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Width 130-150 mm
Length 900-1200 mm
Wear layer thickness
4 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Merbau Nature

Product Description

Wood characteristics:

  • similar colours
  • no knots
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • Finish Board is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, usable approx. 6 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Width 130-150 mm
Length 900-1200 mm
Wear layer thickness
6 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Ash Nature

Product Description

Wood characteristics:

  • varied colours, any jar
  • heartwood and whitish
  • natural rusty discoloration
  • healthy knots
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • Finish Board is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The 4 mm EKO wearable layer consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Width 130-150 mm
Length 900-1200 mm
Wear layer thickness
4 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Oak Latte Macchiatto Nature

Product Description

Wood characteristics:

  • varied colours, any jar,
  • edge whiteness allowed up to 15% of the width of one element,
  • acceptable glance,
  • healthy knots and putty without restrictions,
  • special white undercoat,
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • The top layer, wearable approx. 6 mm, 4 mm ECO or 3 mm consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Finish Board is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Width 130-150 mm
Length 900-1200 mm
or
Thickness 12 mm
Width 140-150 mm
Length 800-1200 mm
Wear layer thickness
3-6 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms