First be Best, Then be First

Parquet Oak Thermo

Product Description

Wood characteristics:

  • similar colours
  • dark antique colour
  • any jar, no white
  • healthy knots
  • acceptable glance
  • thermal treatment
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • Parquet is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, wearable approx. 4 and 6 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • Parquet is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Width 68 mm
Length 490 mm
Wear layer thickness
4 and 6 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Herringbone Oak Thermo

Product Description

Wood characteristics:

  • varied colours
  • any jar
  • sound knots and putty up to approx. 2 mm
  • acceptable minimum gloss
  • suitable for underfloor heating

Details of the floor

Painted version:

  • 7 layers of varnish – hardened with UV rays
  • varnish permanently bonded to the wood, does not crack or peel off
  • high abrasion resistance

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • English Herringbone Finish is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, wearable approx. 6 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • English Herringbone Finish is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Width 130-150 mm
Length 600-750 mm
Wear layer thickness
6 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Herringbone Oak Exclusive

Product Description

Wood characteristics:

  • varied colours
  • any jar
  • healthy knots and putty up to approx. 10 mm
  • acceptable gloss and edge whiteness
  • suitable for underfloor heating

Details of the floor

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • English Herringbone Finish is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, wearable approx. 6 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • English Herringbone Finish is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Width 130-150 mm
Length 600-750 mm
Wear layer thickness
6 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Chevron Oak Exclusive

Product Description

Wood characteristics:

  • varied colours,
  • any jar, edge whiteness allowed,
  • sound knots and putty up to 10 mm,
  • acceptable glance,
  • suitable for underfloor heating

Details of the floor

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • French Herringbone Finish  is a two-layer, oil-waxed floor, bevelled on four sides – after gluing, it does not require sanding.
  • The top layer, wearable approx. 4 mm,  consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations, thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • French Finish  is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Width 140-150 mm
Length 600-750 mm
Wear layer thickness
4 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Herringbone Oak Bleached

Product Description

Wood characteristics:

  • varied colours
  • any jar
  • healthy knots and putty up to approx. 10 mm
  • acceptable gloss and edge whiteness
  • suitable for underfloor heating

Details of the floor

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • English Herringbone Finish is a two-layer floor, ready after gluing, it does not require sanding or varnishing.
  • The top layer, wearable approx. 6 mm, consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • English Herringbone Finish is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Width 130-150 mm
Length 600-750 mm
Wear layer thickness
6 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Chevron Oak Thermo

Product Description

Wood characteristics:

  • similar colours
  • dark antique coluor
  • any jar, no whiteness, healthy knots
  • acceptable glance
  • thermal treatment
  • suitable for underfloor heating

Details of the floor

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • French Herringbone Finish  is a two-layer, oil-waxed floor, bevelled on four sides – after gluing, it does not require sanding.
  • The top layer, wearable approx. 4 mm (board) and 6 mm (parquet),  consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations, thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • French Finish  is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Board
Width 120-150 mm
Length 600-750 mm
Parquet
Width 65-68 mm
Length 560 mm
Wear layer thickness
Board – 4 mm
Parquet – 6 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Chevron Oak Latte Macchiato

Product Description

Wood characteristics:

  • varied colours
  • any jar, acceptable white and gloss
  • sound knots and putty up to 10 mm
  • special white undercoat
  • suitable for underfloor heating

Details of the floor

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • French Herringbone Finish  is a two-layer, oil-waxed floor, bevelled on four sides – after gluing, it does not require sanding.
  • The top layer, wearable approx. 4 mm (board) or approx. 6 mm (parquet),  consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations, thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • French Finish  is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Board
Width 140-150 mm
Length 600-750 mm
Parquet
Width 65-75 mm
Length 560 mm
Wear layer thickness
Board – 4 mm
Parquet – 6 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms

Chevron Oak Nature

Product Description

Wood characteristics:

  • varied colours
  • any jar, edge whiteness allowed
  • sound knots and putty up to 5(parquet) and to 10 mm (board)
  • acceptable glance
  • suitable for underfloor heating

Details of the floor

Oil-waxed version:

  • 3 layers of Osmo oil-wax – hardened with UV rays,
  • deep wood impregnation through oil penetration,
  • high abrasion resistance.

Finish Board

  • French Herringbone Finish  is a two-layer, oil-waxed floor, bevelled on four sides – after gluing, it does not require sanding.
  • The top layer, wearable approx. 4 mm (board) and 6 mm (parquet),  consists entirely of a solid element – natural wood. The bottom layer is a mosaic made of hard deciduous wood, mainly oak and ash. Joining the layers perpendicularly introduces a crosswise arrangement of the grain of the top layer in relation to the bottom part, which ensures stabilization and prevents the floor from warping.
  • This structure enables the multiple process of sanding (renewing) the floor, thanks to which it serves and delights for years and generations.
  • The most modern tongue-and-groove connection system allows for simple and efficient installation of the floor. At the same time, it allows the floor to be laid in various patterns and combinations, thanks to the production of elements with the right and left tongue variant. The technological structure of each element as well as the method of connecting and installing completely eliminate the resonance effect.
  • French Finish  is also an ideal solution for underfloor heating. The perfect design and the best quality raw material used in the production process make the floor perfectly compatible with this type of heating, and the thermal transmittance coefficient guarantees reduction of energy losses to a minimum.

Additional Information

Dimensions
Thickness 14 mm
Board
Width 140-150 mm
Length 600-750 mm
Parquet
Width 70 mm
Length 560 mm
Wear layer thickness
Board – 4 mm
Parquet – 6 mm
Bottom layer
Hardwoods
Method of hardening the oil-wax
UV radiation
Possibility of sanding
Repeatedly
Indoor use
All residential except bathrooms